Insight into room-temperature catalytic oxidation of NO by CrO2(110): A DFT study

The first-principles DFT calculations together with microkinetic analysis reveal the complex catalytic mechanism of low-content NO oxidation on CrO₂(110) at room temperature. It quantitatively makes clear that CrO₂(110) can exhibit considerable activity with the Mars-van-Krevelen mechanism preferred, and the nitrate species serves as the key poisoning species.     

Catalytic activity of nanocrystalline ZnM2O4 (M = Fe,Co) prepared via simple and facile synthesis of thermal decomposition of mixed metal complexes of Schiff bases generated from α-ketobutyric acid and diaminoguanidine

Metal complexes ([ML₂], where M = Fe, Co, or Zn; HL = 2-[(6-ethyl-5-oxo-4,5-dihydro-2H-[1,2,4]triazin-3-ylidene)-hydrazono]-butyric acid, C₉H₁₃N₅O₃) of a Schiff base derived from α-ketobutyric acid (α-KBA) and diaminoguanidine (Damgu) were synthesized and characterized using elemental, spectral, and thermal studies. The metal complexes exhibited similar decomposition behavior, with a highly exothermic final decomposition step resulting in the formation of metal oxides. Isomorphism among the complexes was revealed using a powder X-ray diffraction (PXRD) technique. Solid solution precursors ([Zn_1/3M_2/3(L)₂], where M = Fe, Co) were synthesized and characterized using various physico-chemical techniques. A thermal decomposition technique was used to prepare spinel-type zinc cobaltite (ZnCo₂O₄) and zinc ferrite (ZnFe₂O₄) nanocrystalline particles with the synthesized single source precursors. Structural studies using PXRD ascertained the predominant crystal phase to be spinel. Transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) showed a mean nanoparticle size of 18 ± 2 nm. Magnetic measurements revealed a weak magnetic behavior in the synthesized spinels. In the aqueous phase, the spinels exhibited catalytic activity, reducing 4-nitrophenol (4-NP) in the presence of NaBH₄ at room temperature. Additionally, the study demonstrated that the catalyst can be recovered and reused for five cycles with a more than 85% conversion efficiency.     

Prospects for the combination of mechanochemistry and flow applied to catalytic transformations

The urge of developing modern alternatives regarding industrial production has led to the creation of novel techniques that help overcome critical disadvantages from traditional batch mechanochemistry. One promising strategy includes the merging of flow processes with mechanochemistry. Two technologies are herein highlighted: twin-screw extrusion (TSE) and Impact (induction) in Continuous flow HEated Mechanochemistry (I-CHEM) allowing not only the industrial production of polymers but also active pharmaceutical ingredients, synthesis of (nano)materials, and the obtention of high-added value products from biomass and wastes valorization.     

Synthesis and stability evaluation of hierarchical silicoaluminophosphates with different structural frameworks in the methanol to olefins process

Silicoaluminophosphates (SAPOs) with different pore structures were synthesized through the implementation of polyethylene glycol (PEG) as a mesopores impregnation agent. Using PEGs with different molecular weights (MWs) and concentrations in the synthesis precursor, several samples were synthesized and characterized. Applying a PEG capping agent to the precursors led to the formation of tuned mesopores within the microporous matrix of the SAPO. The effects of the PEG molecular weight and PEG/Al molar ratio were investigated to maximize the efficiency of the catalyst in the methanol-to-olefin (MTO) process. Using PEG with a MW of 6000 resulted in the formation of both Zeolite Rho and chabazite structural frameworks (i.e., DNL-6 and SAPO-34). Pure SAPO-34 samples were successfully prepared using PEG with a MW of 4000. Our results showed that the PEG concentrations affect the porosity and acidity of the synthesized materials. Furthermore, the SAPO-34 sample synthesized with PEG (MW of 4000) and a PEG/Al molar ratio of 0.0125 showed a superior catalytic stability in the MTO reaction owing to the tuned bi-modal porosity and tailored acidity pattern. Finally, through reactivation experiments, it was found that the catalyst is stable even after several regeneration cycles.     

介孔钯-硼合金纳米颗粒的制备和甲醇氧化电催化性能北大核心CSCD

合金化可以调节贵金属纳米材料的物理化学性质,从而显著提升它们的电催化性能。尽管合金化在过去的20多年里已取得诸多成果,但是如何充分发挥纳米合金的组分优势仍需深入的探究。本研究通过一步溶液相合成法实现了类金属硼(B)合金化的钯基介孔纳米催化剂材料的合成,同时探究了B原子的组分优势和介孔形貌的结构优势在碱性介质中电化学甲醇氧化反应(MOR)的协同作用。最优PdCuB介孔纳米催化剂表现出优异的电化学MOR活性和稳定性。机理研究表明,优异的催化活性源于B原子在Pd基介孔纳米催化剂中的积极协同作用;该协同作用通过电子效应(改变Pd的表面电子结构从而减弱CO基中间体的吸附)和双功能效应(促进OH_(2)的吸附从而氧化CO基中间体)在动力学上加速了有毒CO基中间体的去除(提高甲醇氧化的决速步骤)。同时,B原子的间隙插入和介孔结构抑制了物理奥斯特瓦尔德(Ostwald)熟化过程,显著增加了催化剂的稳定性。     

钾改性氧化铝基羰基硫水解催化剂及其失活机理

天然气、油田伴生气、高炉煤气等化工生产过程中伴生COS气体,不仅会腐蚀管道和毒害催化剂,还会严重污染环境并危害人类健康。COS催化水解反应可在温和条件下高效的将COS脱除,是最具应用前景的COS脱除技术之一。碱金属元素因其具有独特的电子供体性质、表面碱性和静电吸附等特性,常被用作助催化剂以提高Al₂O₃的COS催化水解性能。近年来,以钾为助剂改性的Al₂O₃催化剂(K₂CO₃/Al₂O₃)在COS催化水解反应中得到广泛的应用,但由于负载在Al₂O₃上的K物种的组成复杂,目前研究者对K₂CO₃/Al₂O₃催化剂上COS水解机理的理解仍存在一定的困惑和争议。本论文通过湿法浸渍法合成出一系列钾盐和钠盐改性的Al₂O₃催化剂,并利用各类先进的表征技术对这些催化剂进行分析。活性测试表明,以K₂CO₃、K₂C₂O₄、NaHCO₃、Na₂CO₃和NaC₂O₄改性Al₂O₃催化剂均有助于COS的水解。其中K₂CO₃/Al₂O₃拥有最佳的COS水解性能,连续运行20 h后其COS转化率仍高于~93%,远远优于未改性的Al₂O₃ (~58%)。我们利用原位红外光谱和X射线光电子能谱探明了反应过程中催化剂的化学结构特征,阐明了H₂O分子在K₂CO₃/Al₂O₃上的水解作用机制。原位红外表明COS在K₂CO₃/Al₂O₃上的水解过程中形成了硫代碳酸氢盐中间产物。X射线光电子能谱表征证明催化剂的失活主要是因为催化剂表面积累了硫酸盐和单质硫。此外,我们还研究了水蒸气含量对COS水解性能的影响,研究发现,由于H₂O和COS分子在催化剂表面存在竞争吸附,过量的H₂O会引起催化活性的下降。上述研究表明,K₂CO₃/Al₂O₃催化剂上COS水解性能的提高主要是形成了HO-Al-O-K界面活性位。更为重要的是,所制备的催化剂都是在模拟工业工况条件下进行的,这为后续的工业应用提供了宝贵理论指导。本工作为理解助剂钾在Al₂O₃催化剂上COS水解活性的增强提供了新的见解,这为未来设计稳定高效的COS水解催化剂打开了新的发展方向。     

IM-5分子筛在Ni-Cu催化剂甲烷热裂解制氢反应中的作用研究

甲烷热裂解制氢并生成高附加值的纳米碳材料,被认为是极具发展前景的氢气生产途径,但高性能催化剂的研发仍存在诸多挑战.我们选择多种载体(TS-1、 IM-5、 Y、介孔SiO₂、 γ-Al₂O₃、 CNTs),采用浸渍法制备Ni-Cu负载催化剂,通过低温N2吸附-脱附、 XRD、 SEM和H₂-TPR等系列表征方法对样品进行分析,考察不同载体对催化剂甲烷裂解制氢和纳米碳材料的影响.实验结果发现,分子筛载体独特的孔道结构有利于金属颗粒的分散,能有效避免反应中界面效应导致的催化剂失活,可提高催化剂反应活性并延长反应寿命,也显著提高了其碳产率.其中以IM-5分子筛为载体的催化剂表现最佳,在反应温度为700℃时, NiCu/IM-5催化剂甲烷转化率高达80%,氢气选择性达100%,反应400 min后活性未见明显降低. NiCu/IM-5催化剂碳产率高达1 446 g_C/g_cat,是NiCu/SiO₂催化剂的5.7倍, NiCu/γ-Al     

Durable Electrocatalytic Reduction of Nitrate to Ammonia over Defective Pseudobrookite Fe2TiO5 Nanofibers with Abundant Oxygen Vacancies

We propose the pseudobrookite Fe₂TiO₅ nanofiber with abundant oxygen vacancies as a new electrocatalyst to ambiently reduce nitrate to ammonia. Such catalyst achieves a large NH₃ yield of 0.73 mmol h⁻¹ mg⁻¹_cat. and a high Faradaic Efficiency (FE) of 87.6 % in phosphate buffer saline solution with 0.1 M NaNO₃, which is lifted to 1.36 mmol h⁻¹ mg⁻¹_cat. and 96.06 % at −0.9 V vs. RHE for nitrite conversion to ammonia in 0.1 M NaNO₂. It also shows excellent electrochemical durability and structural stability. Theoretical calculation reveals the enhanced conductivity of this catalyst and an extremely low free energy of −0.28 eV for nitrate adsorption at the presence of vacant oxygen.     

A Tailored Versatile and Efficient NHC-Based NNC-Pincer Manganese Catalyst for Hydrogenation of Polar Unsaturated Compounds

The reactivity of metal-hydride complexes can be harnessed by the modification of ancillary ligands. With the aim of improving the hydride-donor ability of the key Mn−H intermediate and reducing steric hindrance, we herein report the rational design of a versatile and efficient NHC-based NNC-pincer Mn catalyst for hydrogenation reactions. This newly developed catalyst exhibited higher activity than the corresponding NNP-pincer Mn catalyst owing to its reduced steric hindrance and enhanced Mn−H σ-bonding orbital energy level through a π-antibonding interaction. Using this highly active NNC-pincer Mn catalyst, a rich array of polar unsaturated compounds (>80 examples) including esters, N-heteroarenes, amides, carbonates, and urea derivatives, were successfully hydrogenated under relatively mild conditions. This work represents a rare example of a general phosphine-free Mn-catalyzed hydrogenation system.     

催化光度法时间程序测定土壤中痕量碘

碘是评价环境的重要元素之一,是地球化学勘察样品常测元素。本实验建立了艾斯卡试剂分解-热水提取样品,催化分光光度法时间程序测定碘的方法。详细讨论了艾斯卡试剂手工制作与行星球磨机制作的利弊;;参比液的选择;17℃-25℃不同环境温度条件对实验结果的影响;全程序空白溶液,与36g/L的碳酸钠溶液两种方法制作标准曲线及标准曲线线性范围;样品烧结时间及温度;乙酸用量对样品测试吸光度的影响。结果表明：利用行星球磨机制作艾斯卡试剂,选择试剂空白为参比液,在19℃的恒温环境下,采用36g/L的碳酸钠溶液制作0-8ug/mL标准曲线,样品采用0-300℃、300-500℃、500-750℃三阶段升温,750℃保持30min的烧结程序,乙酸用量为5mL时可以得到可靠的结果。该方法克服了艾斯卡试剂制作困难、样品烧结结块及实验反应速率过快等困难。通过方法学考察表明：基于所建方法碘元素校准曲线系数＞0.999;方法检出限为0.2 mg/kg;测定GSS36、GSS37、GSS38、GSS40、GSS47、GSS48、GSS49等9种国家一级标准物质,结果均在参考值范围内,相对标准偏差RSD＜5%。该方法测定的结果准确度及精密度高、 检出限低、减少碘记忆效应的存在,适用于地球化学勘察土壤样品中碘的测定。